IMP - Indel Modular Peripherals
The compact and flexibly expandable IMP I/O system consists of an active or passive bus coupler and a series of up to 16 modules. Thanks to the many modules available, the IMP I/O system can be ideally adapted to the given application and if necessary expanded by additional modules.
RequestUp to 4 kHz cycle frenquency
Up to 16 IMP modules per node
For use as fieldbus slave, compact control or fieldbus master
Bus Coupler
Bus Coupler
The basis for an IMP I/O system is the IMP master CPU board and the IMP bus coupler, to which the IMP modules are connected. Unlike the passive bus coupler, the active IMP master has its own CPU. This allows the IMP I/O system to be used as an autonomous compact control system with its own application.
GinLink Fieldbus Coupler
Label: IMP-PAS | Option: GIN | Indel-Nr.: 611552600
- Passive controller
- 5V / 24V participant power supply
I/O-Modules - Digital Inputs
24V Inputs
Label: IMP-16PIN Indel-Nr.: 610839100
- 16 digital inputs 24V
24V Inputs
Label: IMP-8PIN Indel-Nr.: 609826900
- 8 digital inputs 24V
Isolated Inputs
Label: IMP-i8IN Indel-Nr.: 610334600
- 8 isolated digital inputs up to 24V
I/O-Modules - Digital Outputs
24V Outputs
Label: IMP-16POT Indel-Nr.: 610839000
- 16 digital outputs 24V, 2A, short-circuit-proof
24V Outputs
Label: IMP-8POT Indel-Nr.: 609928500
- 8 digital outputs 24V, 2A, short-circuit-proof
Isolated Outputs
Label: IMP-i8OUT Indel-Nr.: 610334500
- 8 isolated digital outputs up to 24V
Digital Outputs 230V
Label: IMP-6PLR Indel-Nr.: 609826800
- 6 relay outputs, 230V
4 Relais with change over contacts
Label: IMP-4RE Indel-Nr.: 610233200
- 4 relay outputs, switch contacts
4 PWM Outputs
Label: IMP-4DC Indel-Nr.: 610334200
- 4 PWM outputs for heating cartridges, 48V, 10A
I/O-Modules - Analogue Inputs and Outputs
Fast Analog Digital Converter
Label: IMP-FADC Option: 16B Indel-Nr.: 609929901
- 4 channel analog inputs , 16Bit, 4kHz, +-10V, +-1V, +-0.1V
Fast Analog Digital Converter
Label: IMP-FADC Option: 12B Indel-Nr.: 609929900
- 4 channel analog inputs , 12Bit, 4kHz, +-10V, +-1V, +-0.1V
Digital Analog Converter
Label: IMP-DAC Option: 10V/20mA Indel-Nr.: 610031001
- 4 channel analog outputs , 16Bit, 4kHz, +-10V, 0...20mA
PT-100 Measurement Module
Label: IMP-PT100 Indel-Nr.: 609929500
- 4 channel PT-100 inputs
Motor output stages
DC Output Stage
Label: IMP-DCM Indel-Nr.: 610132500
- 1 channel DC motor amplifier 4A
Stepper Motor Controller
Label: IMP-SMC Indel-Nr.: 610132200
- 1 channel stepping motor amplifier 4A peak
Stepper Motor Indexer
Label: IMP-SMI Indel-Nr.: 610031200
- 1 channel stepping motor indexer, pulse, direction
Motor output stages - Feedback
Encoder Counter
Label: IMP-INC Option: INC Indel-Nr.: 609929801
- 1 channel counter module: Encoder, counter, SSI
Synchronous Serial Interface
Label: IMP-SSI Option: SSI Indel-Nr.: 609929802
- 1 channel SSI interface, 24 Bit, 1 output 24 V
Special
Serial Interfaces
Label: IMP-SIO Indel-Nr.: 610132400
- 2 channel serial interface
Counter Module
Label: IMP-CNT Option: CNT Indel-Nr.: 609929802
- 1 channel 16-bit counter module, Clk, direction, zero pulse
- 1 input 24V, 1 output 24V
Power Supply
IMP - Power Supply
Label: IMP-5VPS Indel-Nr.: 609827110
- 5V/4A IMP Power supply, Softstart
- 24V Input supply
- Width 22.5mm
Galvanically Isolated Supply
Label: IMP-IOPC Indel-Nr.: 609827110
- 24V Input supply
- Width 17.5mm
Downloads/Links
Get in touch with us
Connect with us to discuss your project requirements with our team
IMP-Masters
The basis for an IMP I/O system is the IMP master CPU board and the IMP bus coupler, to which the IMP modules are connected. Unlike the passive bus coupler, the active IMP master has its own CPU. This allows the IMP I/O system to be used as an autonomous compact control system with its own application.
CPU boards with integrated IMP bus
